Next we need to install the bracket I said to hold on to in step 4.
First slide the cables onto the bracket but do not close the bracket or put the clamping bolt in.
First using a 10mm socket put the (2) M6 bolts in the bracket and tighten it to the car.
Next, adjust the cables as needed around the exhaust and install the M6 clamping bolt with a 10mm boxed-end wrench and tighten as illustrated.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.