We will start from the underside of the car by feeding them up to the transmission side first then into the car on the shifter side.
Once you have the cables staying there we can now move back under the hood.
First slide the end links on the shifter arm assembly and snap on the (2) cotter pins (Fig 1).
Next, pull back on the cable and slide the cable bushing into place. Once the bushings are in place, slide the (2) “c”-shaped linkage clip back on like the OEM ones as illustrated (Fig 2).
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.