First we will start with installing the new transmission selector lever springs.
Before doing so you MUST make sure the car is in neutral before doing anything else.
Once you are completely sure the car is in neutral, we will remove the shifter arm assembly from the transmission.
Start by unplugging the reverse light switch plug (Fig 1). With a 10mm socket, remove the (4) M6 bolts as illustrated in Fig 2(keep track of which bolts came from where because they are different lengths).
Next, you will need an 8mm allen key to remove the lower retaining interlock bolt as illustrated(Fig 3). Now you must pull straight up on the whole assembly to pull it out (you may need a flathead screwdriver to pry on it and get it started).
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.