The Hybrid Racing shifter comes pre-assembled with the SH (SUPER HARD) spring. This spring offers a snappy return however requires more force to move. If you feel this is TOO hard and would like to change to the H (HARD) Spring (included with the shifter) follow these steps.

If you are happy with the feel and function, enjoy your shifter and do not continue.

Begin by locating the four mounting bolts. These these bolts hold the aluminum shifter section to the steel frame.

Use a 4MM Allen and remove the mounting bolts in a cross pattern. Loosen each bolt a little at a time.

The entire assembly is under pressure so take your time removing the bolts. A little at a time until they are all loose. Be prepared to hold the housing as the spring can pop suddenly.