Our shifter has two settings for F/B and L/R movements. They are independently adjustable, meaning you can do whatever combination you prefer.

This is the L/R movement. Adjust this pin to shorten or lengthen the left/right motion of the shifter.

Position 1 is the default setting. This is the LONGEST setting possible. Approximately 15% shorter than OEM.

Position 2 is the SHORTEST setting possible. This is 30% shorter than OEM.

To adjust the throw, simply push the retaining clip off the backside and loosen the pin with a 12mm wrench. Unscrew the pin, place it in the desired location and retighten. Then install the clip.

Be sure to tighten these pins before installing the shifter into your car.