Depending on your car and shifting preference you can adjust the shift knob height and overall position.

The offset must either be in the forward position (10 to 2 on a clock) or the rearward position (8 to 4 on a clock). The offset or rod will contact your console if you have it mounted to the side.

These shifters DO NOT work in RHD cars. The offset WILL contact the console. If you use this in a RHD you will NOT be able to use the console cover. Please understand you will have to modify your center console if you have a RHD car. We do not recommend that.

Tighten the offset so that it does not spin. There is no set torque spec. Tighten it until it doesn't move. You may need to use a ratchet and 6mm Allen socket.