Skip to main content
Editing Step 25 —

Step Type:

Drag to rearrange

Once the CMC is tight against the firewall, pull the pedal upwards towards the pedal stop.

Confirm the pedal is resting on the pedal stop.

If it does not, loosen the pedal stop and thread it down until it touches the pedal.

Retighten the nut and prepare to bleed the system.

It is important that the pedal stop be adjusted IF NEEDED. We calibrate these parts beforehand so you shouldn't have to adjust it, however, if you do need to adjust it slightly that is fine. If you adjust the pedal stop and the pedal it still does not touch it, please stop the installation and contact us ASAP.