Remove the backup light switch using a 27mm socket. Unbolt (using a 12mm socket) and
Reassembly Tips: Apply Honda Bond to the threads before reinstalling. Torque to 22 ft-lb (29 N-m).
Remove the vehicle speed sensor and its o-ring. You may have to twist the speed sensor back and forth a bit to get it loose.
Reassembly Tips: Torque the 12mm bolt to 16 ft-lb (22 N-m).
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.