Editing Step 41 —
Test Valve System

Step Type:

Drag to rearrange

On the key FOB, there are three buttons.

Press OFF to fully close valve.

Press ON to fully open valve.

Press AUTO to step the valve open. You must press OFF first to close it. Pressing this button will allow the valve the step open slightly. You can continue to press AUTO to increase the step. Once you have pressed it enough times, the valve will be fully open. Press OFF to reset the system.

Be sure to test the valve operation before starting the vehicle. The EVC box will beep when the buttons are pressed. You should also hear the valve open and close.

IF YOU DO NOT HEAR A BEEP AND THE VALVE MOTOR DOES NOT REACT TO THE FOB, PLEASE VIEW STEP 44.