Skip to main content
Editing Step 23 —

Step Type:

Drag to rearrange

The exhaust tips are designed to slide in/out and the rear muffler can be shifted left/right.

Install your exhaust tips and position them to your liking.

If you are using the blown tips (slant cut) the tip should not rest behind the carbon panel. The tip should stick out slightly to avoid the hot gasses from melting the panel.

ANY HOT-GAS FROM THE EXHAUST WILL MELT THE CARBON PANEL. BE SURE THE TIP DOES NOT TOUCH THE PANEL. MAKE SURE THE EXHAUST GAS DOES NOT BLOW ONTO THE PANEL. IT WILL MELT.