Installed Apps
Drivetrain
View
Options
History
1
2
3
4
5
6
7
8
Introduction
Details
Guide Steps
Review
Quiz
There is only one detent spring for the 3/4 gear gate. This is marked in yellow.
Install the HR spring in this location to increase the stiffness in the 3/4 gear change.
Be sure to use a dab of Hondabond when reinstalling the detent bolt.
Use a torque wrench and tighten to 16 lbf-ft (29 N-m / 3.0 kgf-m). Do NOT over tighten as the bolts will break.
« Previous
Next »
Next line
Previous line
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.