Skip to main content
Editing Step 5 —

Step Type:

Drag to rearrange

Upload your calibration to your Flashpro by selecting the Flashpro button on the Flashpro window.

Unplug your Flashpro from your computer.

Flash the calibration onto your vehicle.

Plug the Flashpro into the OBD2 port with the ignition switched on but the engine is not running. Hold down the program button for 3 seconds and then release. The program light will flash for 1 minute and 30 seconds while the calibration is uploaded. The light will stop flashing once the calibration is completely uploaded.

You have successfully installed your Flashpro and uploaded a basemap calibration!