Skip to main content

Site Navigation

Your Account

Choose Language

Editing Step 16 —

Step Type:

Drag to rearrange

The Hybrid Racing shifter cables require the use of the factory brackets and seal.

With the cables side-by-side, line each cable up and mark the location of the bracket. This will be used to transfer the bracket to the proper location on the new cable.

Repeat these steps for the second bracket.

You will need to leave the main bolt loose as this will affect how the cables fit into the car. Putting this bracket in the wrong spot will prevent you from being able to connect the cables on one end. Leave them loose until they are installed in the car.