Skip to main content
  1. Begin by confirming that you have an OEM Honda B-Series shifter cable bracket. These are found on the B-Series AWD CRV transmissions. Install the shifter cables through the bracket and use the supplied retaining pins to keep them secured to the gear selector. Then, install the spring C clip securing the shifter cables to the transmission bracket.
    • Begin by confirming that you have an OEM Honda B-Series shifter cable bracket. These are found on the B-Series AWD CRV transmissions.

    • Install the shifter cables through the bracket and use the supplied retaining pins to keep them secured to the gear selector.

    • Then, install the spring C clip securing the shifter cables to the transmission bracket.

    • The etching should be facing upwards. Do not install the shifter cable end link upside down or it can cause the inner tube to bend and it will permanently damage the cable.

  2. Install the shifter cables through the bracket and use the supplied retaining pins to keep them secured to the gear selector. Then, install the spring C clip securing the shifter cable to the transmission bracket. Then, install the spring C clip securing the shifter cable to the transmission bracket.
    • Install the shifter cables through the bracket and use the supplied retaining pins to keep them secured to the gear selector.

    • Then, install the spring C clip securing the shifter cable to the transmission bracket.

  3. Insert the shifter cables through the shifter base and secure them to the shifter with cotter pins. We do not supply the shifter side hardware. Insert the shifter cables through the shifter base and secure them to the shifter with cotter pins. We do not supply the shifter side hardware. Insert the shifter cables through the shifter base and secure them to the shifter with cotter pins. We do not supply the shifter side hardware.
    • Insert the shifter cables through the shifter base and secure them to the shifter with cotter pins. We do not supply the shifter side hardware.

  4. Install the shifter cables through the bracket and use the supplied retaining pins to keep them secured to the gear selector. Once completed, row through all gears and make sure everything is smooth. Be sure to keep the gear selector away from wires and tubes that could impact it during shifting.
    • Install the shifter cables through the bracket and use the supplied retaining pins to keep them secured to the gear selector.

    • Once completed, row through all gears and make sure everything is smooth. Be sure to keep the gear selector away from wires and tubes that could impact it during shifting.

Finish Line

Hybrid Racing

Member since: 04/29/2014

12,413 Reputation

68 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 16

All Time: 235