Engine
View
Options
Preview new Authoring Experience
History
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Introduction
Details
Guide Steps
Review
Quiz
2A. Unplug all four (4) injector wires from the injectors and using your 10 mm socket again, remove the ground connection from the intake manifold as illustrated in FIG 2A.
2B: Using a flat head screwdriver, unclip the injector harness from the fuel rail as illustrated in FIG 2B. Once both clips are undone, slide the harness off and set it to the side.
« Previous
Next »
Next line
Previous line
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.