Since this is a universal part, you will need to remove the shift boot from your console and remove the stock collar.
Fold the shift boot inside out and slide the collar all the way in until it comes out the other end.
Once you have the sleeve in place, stretch the elastic band around the fabric, securing it to the boot.
You should use the elastic band included with the collar kit. Some factory cars use thin zip-ties to secure the fabric but these are bulky and can wear the outside of the boot quickly.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.