Install door panel in reverse order of removal.

Connect door handle before window switch. If done in the other order, the wiring for the window switch will limit the amount of room available to install the door handle.

Place the lip on the top of the panel over the top of the door frame. Allow the panel to rest in place. Then carefully push the panel down.

Ensure that the panel is flush with the door and window seals at the top left and right corners. This is a good gauge of whether or not the panel is correctly slipped at the top of the frame.

Check to ensure that clips are lined up with respective holes. To finish connecting panel to frame, lightly hit panel behind clips.