Changes to Step #2
Edit by David Cordell —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| [title] Mount Shifter Base to Linkage | |
| [* 1] Mount the shifter base to the top of the linkage by using the supplied bolts and nylon washers. | |
| [* 10] Torque spec: ***7 lb-ft***. | |
| [* 9] If you choose to install the third mounting bolt, you must mark and drill a new hole in linkage. This is recommended for racing cars. | |
| + | [* 10] Customers using the Honda Del-Sol shift linkages will only use the 2 pre-drilled bolt holes as the linkage is shaped differently. |