Skip to main content
  1. Please make a note of which insert to use on the shifter cable end link containing the metal spherical bearing. The insert that is smooth and does NOT have the machined groove should be used only on the 07-11 Civic R18  NON-Si model.
    • Please make a note of which insert to use on the shifter cable end link containing the metal spherical bearing.

    • The insert that is smooth and does NOT have the machined groove should be used only on the 07-11 Civic R18 NON-Si model.

    • The insert with the machined groove is for the 2006 model year Civic R18 NON-Si.

  2. The Hybrid Racing logo should always face UP when installed on the transmission. The bottom of the bearing insert should sit flat on the transmission. Install the bushing correctly and then install the retaining clip on the top. If this is installed wrong, it can bend or break the shifter cable as it won't sit flat on the gear selector.
    • The Hybrid Racing logo should always face UP when installed on the transmission.

    • The bottom of the bearing insert should sit flat on the transmission. Install the bushing correctly and then install the retaining clip on the top.

    • If this is installed wrong, it can bend or break the shifter cable as it won't sit flat on the gear selector.

Finish Line

Hybrid Racing

Member since: 04/29/2014

12,413 Reputation

68 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 15

All Time: 231