Skip to main content
User avatar

How to adjust hybrid cable for the tranny

I dont know how to adjust the cable hybrid racing on my tranny . I have a ek4 with k20z3 and a k20a2 tranny

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution
User avatar

You will not be able to adjust any shifter cables as the cables are calibrated for the transmission/application. If you are using a K20A2 transmission then you will want to use the Hybrid Racing RSX Shifter Cables or Short K Swap Cables, HYB-SCA-01-05 and HYB-SCA-01-07 respectively.

Was this answer helpful?

Score 1

Comments:

But how do you adjust the end links on the cables on the shifter end cause I have basically the same car just a k20z1 trans but with a no cut shifter box an now been two days deep on this install an can’t get it to go to 1st and 2nd still

by

Add a comment

Add your answer

Author avatar Phil will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 4

Past 30 Days: 18

All Time: 452