Changes to Step #11

Edit by Hybrid Racing —

Edit approved by Hybrid Racing

Before
After
Unchanged

Step Lines

[title] Optional Trimming Step
[* 1] The easiest thing to do is use a dremel and grind the plastic out of the way, but It can be done with a razor blade as well.
- [* 10] If you would like to adjust the shifter to the shortest setting, a small amount of trimming is needed.
-[* 10] Shown below in the green circle is where the trimming is needed to keep the end link from rubbing.
+ [* 9] ***If you would like to adjust the shifter to the shortest setting, a small amount of trimming is needed.***
+[* 10] Shown below in the green circle is where the trimming is needed to keep the end link from rubbing the console.