Changes to Step #8
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| + | [title] Shorten the throw |
|---|---|
| + | [* 5] First, loosen the binding nut on the post with the 17mm wrench while holding the post with a 12mm wrench. Next, extend the length of the end-link by threading out the post as illustrated by the green arrow in the pictures below. |
| + | [* 1] Tighten the binding nut to the post once the desired length is reached. |
| + | [* 10] To shorten the throw you will need an open-ended 17 and 12mm wrench. |
Image 1
No previous image
Added
Image 2
No previous image
Added