Changes to Step #6
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| + | [* 1] Remove the 32mm sealing cap using a 14mm allen wrench. |
|---|---|
| + | [* 1] Scrape off any Honda Bond that is on the mating surfaces between the sealing cap and the transmission. |
| + | [* 10] ''Reassembly Tips: Remember to put the 72mm snap ring back in the groove on the counter shaft bearing before screwing the 32mm sealing cap back in.'' |
| + | [* 1] Also, apply Honda Bond to the threads of the cap before reinstalling it. |