Changes to Step #5
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| [title] Remove Flange bolts | |
| [* 1] Using a 12mm socket, remove all of the 8mm flange bolts that hold the two halvs of the tranmsission together. | |
| [* 11] All of the bolts should be loosened in several steps before any are removed. The bolts should be loosened in a criss-cross patern to avoid uneccessary stress on the bolts that are still tight. | |
| - | [* 10] Reassembly Tips: First install and hand tighten all of the flange bolts. Then torque the flange bolts to 20 ft-lb (27 N-m) in a criss cross patern. |
| + | [* 10] ''Reassembly Tips: First install and hand tighten all of the flange bolts. Then torque the flange bolts to 20 ft-lb (27 N-m) in a criss cross patern.'' |