Changes to Step #3
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| [title] Remove interlock & unbolt | |
| [* 1] Remove the interlock bolt using a 7mm allen wrench. | |
| - | [* 1] Reassembly Tips: Apply Honda Bond to the threads and torque to 29 ft-lb (39 N-m). |
| + | [* 1] ''Reassembly Tips: Apply Honda Bond to the threads and torque to 29 ft-lb (39 N-m).'' |
| [* 1] Unbolt and remove the shift lever assembly and the two dowel pins that line it up with the transmission case. | |
| [* 11] There should be 4 bolts alltogether. Again, you may have to twist this part back and forth to get it loose. | |
| - | [* 10] Reassembly Tips:Remember to install the two dowel pins to aid in alignment. The 4 bolts should be torqued to 9 ft-lb (12 N-m). |
| + | [* 10] ''Reassembly Tips:Remember to install the two dowel pins to aid in alignment. The 4 bolts should be torqued to 9 ft-lb (12 N-m).'' |