Changes to Step #2

Edit by Hybrid Racing —

Edit approved by Hybrid Racing

Before
After
Unchanged

Step Lines

[title] Remove Backup Light
[* 1] Remove the backup light switch using a 27mm socket. Unbolt (using a 12mm socket) and
- [* 10] Reassembly Tips: Apply Honda Bond to the threads before reinstalling. Torque to 22 ft-lb (29 N-m).
+ [* 10] ''Reassembly Tips: Apply Honda Bond to the threads before reinstalling. Torque to 22 ft-lb (29 N-m).''
[* 1] Remove the vehicle speed sensor and its o-ring. You may have to twist the speed sensor back and forth a bit to get it loose.
- [* 10] Reassembly Tips: Torque the 12mm bolt to 16 ft-lb (22 N-m).
+ [* 10] ''Reassembly Tips: Torque the 12mm bolt to 16 ft-lb (22 N-m).''