Changes to Step #16
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| [* 1] Re-install the CMC into the chassis. | |
| - | [* 1] Bleed the system and adjust the CMC rod accordingly for proper clutch engagement. |
| + | [* 1] Bleed the system and adjust the CMC rod accordingly for proper clutch engagement. Tighten the clutch interlock switch sensor once the adjustment has been made. |
| [* 10] ''Optional - The new clutch line will be able to mount in the factory hard line clips. '' |