Changes to Step #15
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| [* 1] Be sure to install the copper sealing washers on both sides of the banjo fitting. | |
| [* 1] Install the clutch line with the banjo fitting pointing away from the CMC mounting flange. | |
| - | [* 1] Tighten the |
| + | [* 1] Tighten the banjo fitting. (8-10 ft•lbs) |
| [* 9] Do not over tighten the banjo, you could strip or break the fitting. |