Changes to Step #15
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| - | [* 1] Insert wisdom here. |
|---|---|
| + | [* 1] Be sure to install the copper sealing washers on both sides of the banjo fitting. |
| + | [* 1] Install the clutch line with the banjo fitting pointing away from the CMC mounting flange. |
| + | [* 1] Tighten the bajo fitting. |
| + | [* 9] Do not over tighten the banjo, you could strip or break the fitting. |