Changes to Step #14
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| - | [* 1] Insert wisdom here. |
|---|---|
| + | [* 1] Once the EM1 CMC has the correct rod/fork, fill it with fluid. We recommend DOT 4 brake fluid. |
| + | [* 1] Slowly push the rod in and watch for air bubbles to come out of the fitting. The goal of this is to remove as much air from the CMC as possible. This will aid in the bleeding process. |
| + | [* 1] Cap the fluid outlet on the EM1 CMC. |