Changes to Step #2
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| + | [* 1] 2A. Unplug all four (4) injector wires from the injectors and using your 10 mm socket again, remove the ground connection from the intake manifold as illustrated in FIG 2A. |
|---|---|
| + | [* 1] 2B: Using a flat head screwdriver, unclip the injector harness from the fuel rail as illustrated in FIG 2B. Once both clips are undone, slide the harness off and set it to the side. |