Changes to Step #12
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| + | [* 1] Remove the upper spring perch from the factory spring. |
|---|---|
| + | [* 1] Install upper spring perch on the new spring. |
| + | [* 10] The lower spring perch should remain on the lower control arm. |
| + | [* 1] Install the new spring the same way the factory was removed. |
| + | [* 1] ''Reassemble the car in the order the parts were removed. Don't forget the sway bar! '' |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added