Changes to Step #8

Edit by Hybrid Racing —

Edit approved by Hybrid Racing

Before
After
Unchanged

Step Lines

-[* 1] Install the new spring assembly back onto the factory strut and bolt the top hat assembly back to the strut.
+[* 1] Install the new spring assembly and bolt the top hat assembly back to the strut.
[* 11] The new spring is shorter than the factory spring, this should allow you to slightly press down on the spring to get the threaded section of the strut to come through the top hat. If not, please use the spring compressors.
[* 1] The strut is now ready to be installed back on the vehicle.
[* 10] ''Use these same steps for both the front driver and passenger side of the vehicle.''