Changes to Step #8
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| + | [* 1] Install the new spring assembly back onto the factory strut and bolt the top hat assembly back to the strut. |
|---|---|
| + | [* 11] The new spring is shorter than the factory spring, this should allow you to slightly press down on the spring to get the threaded section of the strut to come through the top hat. If not, please use the spring compressors. |
| + | [* 1] The strut is now ready to be installed back on the vehicle. |
| + | [* 10] ''Use these same steps for both the front driver and passenger side of the vehicle.'' |
Image 1
No previous image
Added
Image 2
No previous image
Added