Skip to main content

Changes to Step #13

Edit by Hybrid Racing

Edit approved by Hybrid Racing

Before
After
Unchanged

Step Lines

+[title] Other Notes
+[* 10] No throttle body will have graphite sealing. Our newest design incorporates proper tolerances and geometry that allows the system to seal and function without sealant. This is normal. Do NOT add any sealant or film to the butterfly.
+[* 10] The center shaft and mounting bolts are mechanically locked once they are installed. DO NOT LOOSEN THEM. If you try to remove them, you can damage the throttle body and the screws cannot be used again.
+[* 10] This product will work on the RBC and RRC intake manifolds. It does NOT fit any other manifold without modification. The Skunk2 intake manifolds do not have certain OEM sensor provisions, so be aware it may NOT work as intended.
+[* 1] Contact Support@hybrid-racing.com if you have any issues or questions about your Hybrid Racing throttle body.

Image 1

No previous image

New image

Added

Image 2

No previous image

New image

Added