Changes to Step #1
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
[title] IACV System Block Off | |
[* 1] ***The Idle Air Control Valve system can be used in three ways with this throttle body.*** | |
[* 1] To completely remove the IACV, you must purchase the optional IACV block off plate. Item HYB-ICV-01-04 on the Hybrid Racing website. | |
[* 1] This block off plate is designed specifically for this throttle body however it can be used on the OEM K20A2 throttle body. | |
[* 1] Install the supplied gasket in the correct orientation. You can use a little silicone grease to condition the o-ring. Once the gasket is in place, install the block off plate and NPT plug into the body of the throttle body. | |
[* 1] (RED This will completely remove the IACV from the engine. You MUST disable the IACV control and set your idle manually. For manual idle adjustment, view step 3. RED) | |
+ | [* 1] [link|https://www.hybrid-racing.com/products/hybrid-racing-map-sensor-port-plug?_pos=2&_psq=map+sensor&_ss=e&_v=1.0|MAP SENSOR BLOCK OFF] |