Changes to Step #4
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
+ | [title] Complete Installation |
---|---|
[* 1] Thread both bolts in by hand, then torque them down. | |
[* 5] 65ft-lbs for the 19mm bolt | |
[* 5] 55ft-lbs for the 17mm bolt | |
+ | [* 1] Once the mount is back in place and torqued you can reinstall the aluminum lower cover. |
+ | [* 10] Start the engine and make sure there are no abnormal noises. |
+ | [* 11] KEEP IN MIND - This is an upgraded, stiffer engine mount. Stiffer means there will be more NVH transmitted through the chassis into the cabin. NVH means Noise, Vibration and Harshness. 62A is fine for street cars; anything stiffer than that will be more hardcore. |