Changes to Step #3
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| + | [title] Mount Installation |
|---|---|
| [* 1] Install the Hasport mount with the aluminum washer facing up. | |
| [* 1] Repeat the process as before, put the bolt halfway in and slide the mount in towards the rear subframe. | |
| [* 9] You may need to use a mallet or rubber hammer to wedge it into place.w line. | |
| - | [* 1] Once in you can push the bolt into place and thread them in. |
| - | [* 1] Thread both bolts in by hand then torque them down. |
| - | [* 5] 65ft-lbs for the 19mm bolt |
| - | [* 5] 55ft-lbs for the 17mm bolt |