Changes to Step #9

Edit by Hybrid Racing —

Edit approved by Hybrid Racing

Before
After
Unchanged

Step Lines

-[title] Connecting Clutchline to SLV Cylinder
+[title] Connect Clutchline to SLV Cylinder
[* 1] Using provided Banjo bolt, connect Clutchline to SLV Cylinder.
[* 10] Use a 17mm and 14mm open-ended wrench.
[* 1] Hold fitting on SLV Cylinder with the 17mm wrench.
[* 10] To reach the location, you can pass the 17mm between the Lower Radiator Hose and Intake Manifold
[* 1] Tighten the Banjo bolt using the 14mm wrench.
[* 9] ***DOUBLE CHECK*** that banjo washers and bolt are installed properly.