Changes to Step #9
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| [title] Connecting Clutchline to SLV Cylinder | |
| [* 1] Using provided Banjo bolt, connect Clutchline to SLV Cylinder. | |
| [* 10] Use a 17mm and 14mm open-ended wrench. | |
| [* 1] Hold fitting on SLV Cylinder with the 17mm wrench. | |
| - | [* 10] To reach the location, you can pass the 17mm between the Radiator Hose and Intake Manifold |
| + | [* 10] To reach the location, you can pass the 17mm between the Lower Radiator Hose and Intake Manifold |
| [* 1] Tighten the Banjo bolt using the 14mm wrench. | |
| [* 9] ***DOUBLE CHECK*** that banjo washers and bolt are installed properly. |