Changes to Step #9
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| + | [title] Connecting Clutchline to SLV Cylinder |
|---|---|
| + | [* 1] Using provided Banjo bolt, connect Clutchline to SLV Cylinder. |
| + | [* 10] Use a 17mm and 14mm open-ended wrench. |
| + | [* 1] Hold fitting on SLV Cylinder with the 17mm wrench. |
| + | [* 10] To reach the location, you can pass the 17mm between the Radiator Hose and Intake Manifold |
| + | [* 1] Tighten the Banjo bolt using the 14mm wrench. |
| + | [* 9] ***DOUBLE CHECK*** that banjo washers and bolt are installed properly. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added