Changes to Step #7
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| - | [title] |
|---|---|
| + | [title] Remove & Install - Slave Cylinder |
| [* 1] Remove OE Clutch Line from Slave Cylinder | |
| [* 1] Remove OE Slave Cylinder. | |
| [* 10] Use 12mm socket and extension to remove x2 M8x1.25 bolts | |
| [* 1] Replace OE Slave Cylinder with New unit. | |
| [* 10] Use provided x2 M8x1.25 bolts to install. | |
| [* 9] ***DOUBLE CHECK*** that Slave Cylinder Rod is seated properly on Clutch Fork. |