Changes to Step #7
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| + | [title] Removal & Installation - Slave Cylinder |
|---|---|
| + | [* 1] Remove OE Clutch Line from Slave Cylinder |
| + | [* 1] Remove OE Slave Cylinder. |
| + | [* 10] Use 12mm socket and extension to remove x2 M8x1.25 bolts |
| + | [* 1] Replace OE Slave Cylinder with New unit. |
| + | [* 10] Use provided x2 M8x1.25 bolts to install. |
| + | [* 9] ***DOUBLE CHECK*** that Slave Cylinder Rod is seated properly on Clutch Fork. |
Image 1
No previous image
Added
Image 2
No previous image
Added