Changes to Step #6
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| - | [title] |
|---|---|
| + | [title] Connect CMC to Pedal |
| [* 10] Before tightening CMC to Firewall, ensure that Clevis is straddling the pedal. | |
| [* 1] Using the provided x2 M8x1.25 nuts, tighten the CMC to Firewall. | |
| [* 1] Using provided Silicone Grease, grease the Clevis Pin. | |
| [* 1] Push Clevis Pin through Clevis and Pedal. | |
| [* 10] Jiggle the pedal to help align holes. | |
| [* 1] Use provided Cotter Pin to retain the Clevis Pin. |