Changes to Step #1

Edit by Hybrid Racing —

Edit approved by Hybrid Racing

Before
After
Unchanged

Step Lines

[title] Removal - Clevis Pin and Nuts
[* 1] Remove the ***Cotter Pin*** and ***Clevis Pin***
- [* 9] Inspect the ***Clevis Pin*** for wear. On high-mile 04-08 TSX, we have seen clutch petal cause wear on the pin. If it is worn, you can reuse, but plan to replace.
+ [* 9] Inspect the ***Clevis Pin*** for wear. On high-mile 04-08 TSX, we have seen clutch petal cause wear to the pin. If it is worn, you can reuse, but plan to replace.
[* 1] Remove x2 M8x1.25mm nuts holding CMC to Firewall.
[* 10] Use a 12mm deep-socket (preferably on 1/4-drive rachet)