Changes to Step #1
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| - | [title] Removal - |
|---|---|
| + | [title] Removal - Clevis Pin and Nuts |
| [* 1] Remove the ***Cotter Pin*** and ***Clevis Pin*** | |
| [* 9] Inspect the ***Clevis Pin*** for wear. On high-mile 04-08 TSX, we have seen clutch petal cause wear on the pin. If it is worn, you can reuse, but plan to replace. | |
| [* 1] Remove x2 M8x1.25mm nuts holding CMC to Firewall. | |
| [* 10] Use a 12mm deep-socket (preferably on 1/4-drive rachet) |