Skip to main content

Changes to Step #43

Edit by Hybrid Racing

Edit approved by Hybrid Racing

Before
After
Unchanged

Step Lines

+[title] EVC Box Wiring Diagram
+[* 10] Our EVC module can be expanded to control two valves simultaneously. Connectors A and C are the outputs for the valve motor. Either A or C can power your exhaust valve motor.
+[* 1] The valve motor must have a ground and power signal, which are supplied by the EVC box.
+[* 1] Connector B in the center of the EVC box is connected to the chassis wiring. The chassis wiring will supply the EVC box with power and ground to control the valve motor.
+[* 1] B2 - should connect to a chassis ground, per the eyelet on our harness.
+[* 1] B3 - should connect to the underdash fuse box. This must be a key on 12v source. There is an inline fuse for protection.

Image 1

No previous image

New image

Added