Skip to main content

Changes to Step #30

Edit by Hybrid Racing

Edit approved by Hybrid Racing

Before
After
Unchanged

Step Lines

-[* 1] Insert wisdom here
+[title] Valve Controller
+[* 1] Connect both wiring harnesses to the controller box.
+[* 1] On the back, remove the tape backing and install the controller under the trunk latch.
+[* 1] Be sure this position does not prevent the panel from going back in place.
+[* 11] It is normal for the panel to bulge slightly after being installed. This is fine. It keeps the box from moving or rattling.