Changes to Step #28
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
- | [* 1] Insert wisdom here |
---|---|
+ | [title] Exhaust Valve Harness |
+ | [* 1] On the rear bulkhead, locate the rubber grommet in the center. Use your fingers or a flat-tipped pry tool and pull the grommet free. |
+ | [* 1] With the grommet free, you will need to fish the other end of the valve harness through the hole. This can be a little tricky but if you have a friend feed the wire, you can pull it through. |
+ | [* 10] Pull all but a little slack through the floor and prepare to mount the controller box. |