Changes to Step #7
Edit by Hybrid Racing —
Edit approved by Hybrid Racing
- Before
- After
- Unchanged
Step Lines
| + | [title] Remove Bumper Trim |
|---|---|
| + | [* 1] Before you can install the Hybrid Racing bumper trim, you must remove the factory insert. |
| + | [* 1] Remove the two outer retaining clips using a trim tool. |
| + | [* 1] The top section of the trim is held in with molded clips. You can use a flat tipped screw driver to depress the tips and remove the trim from the bumper. |
| + | [* 1] Once this part is removed, you are ready to begin the installation of the HR exhaust. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added